If Shi Ying Shuikou brick leaks, it can be treated according to the following steps:

I. Check the causes of leakage

Check the integrity of brick: check whether there are cracks, defects or other defects in Shi Ying Shuikou brick.

Check the installation position: confirm whether the nozzle brick is installed in place and whether there are gaps caused by improper installation.

Check sealing materials: check whether sealing materials such as fireclay and ramming materials are evenly spread and whether there are gaps that fall off or are not filled.

II. Dealing with the leaking parts

Cleaning the gap: clean up the dust and sundries at the leaking part.

Apply sealing material:

Waterproof caulking agent: it is suitable for temporarily solving the problem of water seepage, but it may still leak after long-term use.

Joint sealant: after the waterproof agent is dried, fill all the gaps with joint sealant.

Cement-based osmotic crystallization plugging material: suitable for seepage surface construction, with high seepage pressure resistance and good water resistance.

III. Repair damaged parts

Replace the damaged brick body: If the nozzle brick itself is cracked or damaged, it needs to be replaced with a new brick body.

Re-apply sealing material: after replacement or repair, re-apply fireclay or ramming material to ensure sealing.

IV. Strengthening protective measures

Preheating treatment: Shi Ying Shuikou brick should be properly preheated before use, so as to avoid the brick cracking caused by sudden temperature change.

Regular inspection: In the process of use, check the service status of the nozzle brick regularly, and find and deal with possible cracks or damage in time.

V. Professional handling

If the leakage problem is serious, it is recommended to contact a professional maintenance team to deal with it. They can provide more professional detection and repair services.

Through the above steps, the leakage problem of Shi Ying Shuikou brick can be effectively solved, and its stability and service life in high temperature environment can be ensured.